Mistakes when storing samples in freezers and refrigerators

Share

Sample integrity depends on more than setting a temperature to −20 °C and closing the door. Temperature excursions, poor sample placement, inconsistent defrost cycles, and inadequate monitoring can put stored samples at risk in analytical, clinical, and biobanking laboratories.

A freezer failure can compromise valuable samples and affect the reliability of long-term studies or regulated work. This post covers the most common storage mistakes, good storage practices, and monitoring approaches that can help detect problems before they lead to sample loss.

Overview

MistakeConsequenceBest practice
Wrong storage temperatureSample degradationMatch temperature to sample type
Repeated freeze-thawSample degradationAliquot samples
Overloaded freezerTemperature gradients and slow recoveryStay below the recommended capacity
Poor monitoringMissed excursionsUse continuous independent monitoring
Frequent door openingsSlow temperature recoveryOrganized inventory

Key takeaways

Laboratory sample storage failures are commonly associated with:

  • Incorrect storage temperatures
  • Repeated freeze-thaw cycles
  • Overloaded freezers
  • Inadequate temperature monitoring
  • Poor inventory management
  • Lack of contingency planning

Why laboratory sample storage failures are so costly

A failed −80 °C freezer holding a biobank of plasma or tissue samples cannot simply be replaced with fresh material. Many samples represent unrepeatable time points, from clinical trial baseline samples to environmental samples tied to a specific collection date. ISO 20387 provides requirements and guidance for managing risks and maintaining the quality and integrity of biological material in biobanking, including the control of storage conditions.

The financial impact can also be significant. A single ultra-low-temperature freezer may contain samples whose scientific or research value far exceeds the replacement cost of the equipment itself. This makes sample storage more than a technical issue: reliable storage and monitoring are also important for quality management, traceability, and compliance.

Setting the wrong temperature for the sample type

One of the most common mistakes is applying a single storage temperature to sample types with different stability requirements. Storage conditions should be selected based on the sample type, its intended use, and validated storage requirements.

  • Whole blood and serum may be stored at 2–8 °C for short-term storage, but the acceptable storage time depends on the sample type, analyte, processing conditions, and analytical method.
  • RNA is generally more susceptible to degradation than DNA and is commonly stored at −80 °C for long-term preservation, depending on the sample type and application.
  • DNA is generally more stable than RNA and can often be stored at −20 °C for long-term use, depending on the sample type and application.
  • Enzymes and other proteins have sample-specific storage requirements. Some require freezing at −20 °C or −80 °C, while stabilizers such as glycerol may be used for certain preparations.
  • Live cells intended for long-term cryopreservation are typically frozen using a controlled-rate process and stored at cryogenic temperatures, often in the vapor phase of liquid nitrogen. Standard laboratory freezers are not suitable for long-term cryogenic storage of these samples.

Using the same storage temperature for all nucleic acid samples can increase the risk of sample degradation. RNA generally requires more stringent storage conditions than DNA, so storage recommendations should be based on the sample type, stability requirements, and intended application.

Ignoring freeze-thaw cycle limits

Repeated freeze-thaw cycling is an important source of sample degradation. Each cycle can cause physical and chemical changes that affect sample integrity, including protein denaturation, loss of biological activity, and degradation of some nucleic acids. The impact depends on the sample type, storage conditions, and number of freeze-thaw cycles.

Some proteins, antibodies, and other sensitive analytes can be affected by repeated freeze-thaw cycles, while others are relatively stable. The common mistake is storing an entire sample in one vial and repeatedly thawing and refreezing it for sequential testing. A better approach is to prepare appropriate aliquots before initial freezing, so individual portions can be thawed when needed without repeatedly exposing the entire sample to temperature changes.

The appropriate aliquot volume depends on the sample type, test requirements, and expected use. Smaller, single-use aliquots can help minimize unnecessary freeze-thaw cycles and preserve the integrity of the remaining sample.

Overloading freezer and refrigerator capacity

Manufacturers specify recommended loading capacities and operating conditions for laboratory freezers and refrigerators. Exceeding these limits can restrict airflow, reduce temperature uniformity, and extend temperature recovery after door openings.

Overloading can also make it more difficult for the unit to maintain stable conditions throughout the storage space. Temperature differences may occur between different locations within the chamber, particularly when airflow is restricted or when the unit is frequently opened.

For this reason, laboratories should follow the manufacturer’s recommended loading capacity and avoid blocking vents or airflow paths. Samples should also be organized to allow adequate air circulation and minimize unnecessary door openings. Temperature mapping and independent monitoring can help identify areas where storage conditions are less stable.

Poor door management and door opening frequency

Every time an ultra-low-temperature freezer is opened, warm ambient air enters the chamber and the internal temperature can fluctuate. The time required to return to the target temperature depends on factors such as the freezer design, duration of the door opening, ambient conditions, and how frequently the unit is accessed.

In high-traffic laboratories, frequent door openings can increase temperature fluctuations and make it more difficult for the freezer to maintain stable storage conditions.

Common contributing mistakes include:

  • Leaving the door open while searching for a specific box or vial instead of preparing an inventory map and retrieving contents efficiently.
  • Storing frequently accessed samples in a location that requires repeated access to the main freezer, rather than using an appropriate solution such as a dedicated refrigerator or freezer for samples with higher access frequency.
  • Skipping door gasket inspections. A damaged or poorly sealing gasket can allow warm air to enter the chamber and make it harder for the unit to maintain the required temperature.

Organizing samples by frequency of use and maintaining an up-to-date inventory can reduce unnecessary door openings. For laboratories with frequent access requirements, equipment designed for high-access workflows may also help limit temperature fluctuations.

Inadequate temperature monitoring and alarm systems

Relying solely on a freezer’s built-in temperature display can leave laboratories without sufficient warning of storage problems. The displayed temperature may not represent conditions throughout the entire chamber, and a failure of the freezer’s control or monitoring system may not provide an independent warning.

Effective monitoring generally includes:

  • Continuous temperature monitoring and data logging at an interval appropriate for the equipment, sample type, and risk level, rather than relying only on manual spot checks.
  • Independent temperature probes that are calibrated according to a documented schedule and, where required, traceable to a recognized reference standard.
  • Remote alarm notification systems that alert responsible staff when temperatures move outside defined limits, including outside normal working hours.
  • Defined excursion thresholds and response protocols specifying when an excursion requires investigation and what actions should be taken to protect affected samples.
  • Regular review of temperature records and alarm systems to confirm that monitoring remains functional and that excursions are identified and addressed promptly.

Placing samples in the wrong freezer zone

Not all areas within a freezer or refrigerator provide the same storage conditions. Temperature differences can occur between locations in the chamber, particularly when airflow is restricted or when the unit is frequently opened.

Frost-free refrigerators and freezers use automatic defrost cycles to prevent ice buildup. These cycles can cause temporary temperature fluctuations, which may be unsuitable for certain temperature-sensitive samples. Laboratory-grade units designed for stable storage conditions may use different defrost systems, including manual defrost, depending on the equipment and application.

A frequent mistake is storing temperature-sensitive reagents, particularly enzymes and antibody conjugates, in a general-purpose frost-free unit intended for consumer or office use rather than a laboratory-grade unit designed for the required storage conditions.

The appropriate equipment depends on the sample type, required temperature, and intended use. Laboratories should follow the manufacturer’s recommendations and the validated storage requirements for each sample.

Failing to plan for power outages and backup systems

Power interruptions can put stored samples at risk, particularly when freezers or refrigerators cannot maintain their required temperature for an extended period. Many laboratories only discover gaps in their backup planning when an outage occurs.

Common oversights include:

  • No backup generator or uninterruptible power supply suitable for the equipment and its electrical requirements.
  • No contingency plan for transferring samples to alternative storage during an extended outage.
  • No suitable backup storage capacity, such as an additional freezer or an appropriate cryogenic storage solution, when required.
  • Lack of a documented decision tree specifying which samples receive priority if backup capacity is limited.
  • No defined procedures for monitoring temperatures and assessing sample integrity after an outage.

The appropriate backup solution depends on the equipment, sample type, storage temperature, and expected duration of the interruption. Laboratories should establish contingency plans in advance and review them regularly.

Mislabeling and inventory mismanagement

Storage failures are not always thermal. Illegible or non-standardized labeling, inconsistent barcode systems, and undocumented sample relocations can lead to lost or misidentified samples even when temperature control is adequate.

ISO 15189 addresses sample identification and traceability in medical laboratories, including the identification of samples throughout the examination process. Laboratories should therefore maintain clear identification procedures and ensure that sample locations remain traceable.

A related mistake is failing to maintain a digital inventory map showing the exact freezer, shelf, rack, and box position of each sample. Without an accurate inventory, staff may spend more time searching for samples, increasing door-opening frequency and handling risk.

A well-organized inventory helps laboratories locate samples efficiently, reduce unnecessary freezer access, and maintain traceability throughout the storage lifecycle.

Building a practical prevention checklist

Reducing storage-related sample loss comes down to applying a consistent set of good storage practices. Match the storage temperature to the specific sample type rather than relying on a facility-wide default. Aliquot samples when appropriate to limit freeze-thaw exposure, avoid overloading units beyond their recommended capacity, and use independent temperature monitoring with appropriate alarm notifications. Follow the manufacturer’s recommendations for defrosting, and maintain a documented and tested contingency plan for power failures.

None of these measures is complex individually, but together they help maintain stable storage conditions and protect samples throughout long-term storage.

A practical prevention checklist includes:

  • Match storage temperature to the sample type and validated storage requirements.
  • Minimize unnecessary freeze-thaw cycles by using appropriate aliquots.
  • Keep freezers and refrigerators within the manufacturer’s recommended loading capacity.
  • Organize samples to allow adequate airflow and minimize unnecessary door openings.
  • Monitor temperatures continuously using an appropriate independent monitoring system.
  • Set up alarms and response procedures for temperature excursions.
  • Follow appropriate defrosting and maintenance procedures.
  • Maintain an accurate sample inventory and ensure sample locations remain traceable.
  • Establish and regularly test a contingency plan for power failures and equipment breakdowns.

Consistent storage practices can help preserve sample integrity, reduce the risk of sample loss, and support reliable analytical results over the lifetime of a sample archive.

Our solutions

Explore our freezers here

Explore our refrigerators here