Selecting the right centrifuge comes down to matching the centrifuge format, rotor type, required RCF, capacity, temperature control, and safety features to the specific samples and separation tasks a laboratory performs.
This page walks through the key decision points for choosing between the many centrifuge configurations available.
Benchtop vs floor-standing centrifuge
The choice between a benchtop and floor-standing centrifuge depends primarily on sample throughput and available space. Benchtop centrifuges suit laboratories running routine, moderate-volume workflows within a limited footprint.
Floor-standing centrifuges are better suited to high-throughput workflows, larger sample volumes, or applications requiring large-capacity rotors.
- Choose a benchtop centrifuge for general lab workflows with moderate sample numbers
- Choose a floor-standing centrifuge for high-throughput or large-batch processing needs
- Consider available bench space and whether the lab has room for a larger floor unit
Fixed-angle vs swing-out rotor
Fixed-angle rotors are efficient for pelleting because particles sediment along a shorter path toward the outer wall of the tube.
Swing-out rotors suit applications requiring an even, undisturbed pellet or a preserved liquid layering, such as density gradient separations, since tubes remain horizontal during the spin.
- Choose a fixed-angle rotor for quick, routine pelleting tasks
- Choose a swing-out rotor for gradient work or applications needing a flat, even pellet
- Some laboratories keep both rotor types available for a single centrifuge base unit to cover a wider range of protocols
What RCF do I need?
Required RCF should be determined by the specific separation protocol being followed, since different sample types, cells, organelles, proteins, or nucleic acids, require different force levels to achieve the required separation efficiency without damaging sensitive sample components.
Reviewing the RCF specified in an established protocol, rather than defaulting to a centrifuge’s maximum capability, ensures the separation is both effective and gentle enough to avoid damaging fragile sample components.
What speed range do I need?
The required speed range depends on the application, since different sample types require different centrifugal forces to achieve effective separation. Routine cell pelleting typically requires several thousand × g, while separating smaller particles such as organelles, viruses, or macromolecular complexes requires much higher RCF values. Because RPM depends on the rotor radius and geometry, RCF is the more meaningful specification when comparing centrifuges for a specific application. It represents the actual force applied to the sample rather than only the rotor’s rotational speed.
What capacity do I need?
Capacity should be selected based on the number of samples typically processed per run and the tube or bottle volume those samples require, including any anticipated increase in throughput. Since rotor capacity and achievable RCF are often inversely related, choosing a rotor with far more capacity than needed can limit the maximum force available for smaller, high-force applications.
A centrifuge holding 24 × 1.5 mL tubes and one holding 6 × 50 mL tubes may have very different practical capacities even if both are described as “high capacity.”
Do I need refrigeration?
Refrigeration is necessary for any workflow involving temperature-sensitive samples, such as live cells, proteins, or enzymes, where frictional heat generated during high-speed spinning could otherwise compromise sample integrity.
Laboratories working exclusively with stable, non-biological samples, such as certain chemical precipitates, may not require a refrigerated model, though refrigerated centrifuges offer added flexibility if sample types are likely to vary over time.
Which tube sizes should the centrifuge support?
Tube size requirements should be based on the sample volumes used across a laboratory’s protocols, since rotors and adapters are matched to specific tube formats, from small microcentrifuge tubes to larger bottles used in floor-standing units. Choosing a centrifuge with access to a range of compatible tube adapters offers more flexibility to support multiple sample formats without requiring a separate rotor for each one.
Tubes, bottles, and adapters must be rated for the maximum RCF generated by the selected rotor.