The main differences between laboratory balance types are their readability, weighing capacity, accuracy requirements, environmental sensitivity, and the applications they are designed for. Higher-resolution balances require stricter control of factors such as vibration, temperature fluctuations, airflow, and electrostatic interference. The four main categories are analytical balances, precision balances, semi-micro balances, and microbalances. Each is suitable for different range of sample sizes and accuracy requirements.
| Balance type | Typical readability | Typical capacity | Typical use case |
| Analytical balance | 0.1 mg or 0.01 mg | 60 g to 320 g | Quantitative analysis, titrations, formulation |
| Precision balance | 0.001 g to 0.01 g | 200 g to 60 kg+ | General weighing, raw materials, QC |
| Semi-micro balance | 0.01 mg | Slightly higher than microbalances | Small samples needing more capacity than a microbalance |
| Microbalance | 0.001 mg (1 µg) | Up to ~20 g | Trace analysis, filter weighing, material science |
| Moisture analyzer | 0.1 mg to 2 mg | Typically up to ~200 g | Moisture content determination in powders, food, pharma raw materials |
Analytical balances
Analytical balances offer a readability of 0.1 mg or 0.01 mg and are the standard instrument for quantitative chemical analysis, titrations, and formulation work. They typically have a capacity range between 60 g and 320 g, feature a glass draft shield to protect against air currents, and rely on electromagnetic force restoration to achieve consistent, repeatable results at this precision level.
- Suitable for preparing reference standards, calibrating pipettes, and quantitative sample analysis
- Require a stable, vibration-free surface, often a dedicated weighing table
- Commonly integrated with LIMS or balance software for automated data capture
Explore the Apollo GX-A/GF-A Series here
Explore the Galaxy HR Series here
Precision balances
Precision balances have a readability between 0.001 g and 0.01 g and are suitable for general-purpose weighing tasks that do not require analytical-level resolution. They typically offer higher capacities than analytical balances, often ranging from 200 g up to 60 kg or more, making them suitable for weighing larger samples, raw materials, or formulation components.
- Ideal for sample preparation, quality control, and industrial or production weighing
- Less sensitive to environmental disturbances than analytical balances, so draft shields are often unnecessary
- Available in top-loading configurations for easier handling of larger vessels
Explore the FXi-WP series here
Explore the Apollo GX-A/GF-A Series here
Explore the Fortis FZ(-WP)/FX(-WP) Series here
Semi-micro balances
Semi-micro balances are high-resolution analytical balances that are ideal for weighing smaller sample quantities with greater sensitivity than standard analytical balances. They typically provide 0.01 mg readability while maintaining a practical weighing capacity. They combine the fine resolution needed for small sample weighing with a more practical working capacity. This makes them suitable for laboratories that need micro-level precision without the capacity constraints of a full microbalance.
- Suitable when sample sizes are small but a higher capacity than a microbalance is needed
- Retain draft shielding and vibration control similar to analytical and microbalances
- Common in pharmaceutical formulation and R&D laboratories handling low-dose active ingredients
Explore the Borealis BA Series here
Explore the Phoenix GH Series here
Explore the BH-T Series here
Explore the Ion BM Series here
Explore the Gemini GR series here
Microbalances
Microbalances provide a readability of 0.001 mg (1 microgram) and can weigh extremely small sample quantities, typically below 20 g in capacity. They are engineered with advanced vibration dampening, internal calibration, and enhanced draft protection, since even minute air currents or electrostatic charge can significantly distort a reading at microgram resolution.
- Common in trace analysis, filter weighing, and material science applications requiring sub-microgram sensitivity
- Ultra-microbalances extend readability further, to 0.0001 mg, for specialized research applications
- Sample handling typically requires antistatic tools and controlled ambient conditions
Explore the Ion BM Series here
Explore the Borealis BA Series here
Moisture analyzers
Moisture analyzers, also called moisture balances, combine a high-resolution weighing system with a built-in heating source to determine the moisture content of a sample. The instrument continuously monitors the sample weight during heating, typically using halogen, infrared, or convection heating elements, calculates moisture content from the difference between the initial sample mass and the final dry mass after moisture evaporation. This loss-on-drying (LOD) principle provides a direct moisture result without requiring a separate drying oven and manual weighing step.
- Used for testing moisture content in powders, granules, food products, and pharmaceutical raw materials sensitive to water content
- Halogen heating elements are the most common, offering fast, even heating and shorter test times than convection ovens
- Weighing resolution typically ranges from 0.1 mg to 1 mg depending on the model, while measurement performance also depends on sample properties and drying conditions
- Test parameters such as drying temperature, endpoint criteria, and sample weight can usually be programmed and stored for repeat testing
Explore our moisture analyzers here