Moisture analyzers 

Moisture analyzers with straight halogen lamp and super hybrid sensor
Super Hybrid Sensor (SHS)
Halogen heating and maintenance
4 selectable heating modes

Request a quote

Request a quote

Smart lab solutions

At LabSPX, we are committed to bringing innovative and efficient solutions to laboratories. Our Smart Lab Solutions are designed to streamline processes, enhance accuracy, and boost productivity.

Functionalities and technical specifications

Moisture analyzers

A&D moisture analyzers provide moisture content results within minutes and simplify loss-on-drying measurements. The analyzers combine high-precision weighing with halogen heating to provide fast and uniform sample heating, while offering selectable measurement and heating modes for different sample types.

The Super Hybrid Sensor (SHS) provides high-precision weighing, allowing accurate moisture content determination even when working with small samples. A Secondary Radiation Assist (SRA) filter works with the halogen lamp to provide faster and more uniform heating, helping to reduce measurement time.

Fast and flexible moisture measurements

A&D moisture analyzers offer four selectable heating modes: Standard, Quick, Step, and Ramp. These modes allow heating curves adapt to different sample types.

Five measurement programs are available:

  • Standard: The measurement accuracy setting can be selected as HI, MID, or LO.
  • Automatic: The measurement ends when the moisture content changes at a rate below the set value.
  • Quick: The sample heats at 200°C for 3 minutes before continuing in Automatic mode.
  • Timer: Measurement continues for a predefined period.
  • Manual: The user ends the measurement by pressing the STOP button. The maximum heating time is 480 minutes.

The available heating modes depend on the model. ML models provide Standard and Quick heating modes, while other models can offer Standard, Quick, Step, and Ramp modes.

Clear operation and ergonomic design

A large VFD display clearly shows measurement values, set values, changes in moisture content, operating status, data numbers, and other relevant information during operation.

The analyzers are ideal for convenient handling of samples. An ergonomic pan handle allows hot sample pans move into or out of the unit from either side, helping to prevent burns. A wing handle is provided for opening and closing the heater cover.

A translucent window provides visibility of the heating process during measurement, while a Quick Reference Card is integrated at the bottom of the analyzer for convenient access to operating instructions. Self-check functions, including a defect check function and temperature control checks, support reliable operation.

Data management and traceability

A&D moisture analyzers support data management through an RS-232C interface and WinCT-Moisture software. The software can display the change in moisture content as a real-time graph while the analyzer is connected to a PC. It can also help determine measurement conditions and optimize measurement time and accuracy.

The memory function allows measurement conditions and results to be stored, recalled, and output for further analysis. Depending on the model, you van store and recall up to 20 measurement conditions: 20 for the specified model, 10 for MF models, and 5 for ML models. Up to 100 measurement results can be stored and output at once, with capacities of 50 for MF models and 30 for ML models.

Data output can include date and time, identification information, calibration data, and check records for GLP, GMP, GCP, and ISO-compliant reporting.

Accuracy checking and calibration

Sodium Tartrate Dihydrate comes as standard for accuracy checking. It has a stable moisture content of 15.66%, providing a reference value for checking the accuracy of the moisture analyzer. For MS and MX models, you can calibrate the heater temperature using an optional temperature calibrator. Calibration results can be output in a format conforming to GLP, GMP, and ISO requirements.

High-moisture and low-moisture measurements

The MS-70 measures moisture content with a resolution of 0.001%. This makes it suitable for low-moisture samples and applications where moisture determination is performed using the Karl Fischer method, without requiring special knowledge or training and without producing harmful waste.

Halogen heating and maintenance

The halogen lamp provides rapid heating, while the SRA filter contributes to uniform heat distribution and shorter measurement times. The halogen lamp is replaceable by the user without requiring unit downtime. A protective chamber also supports easier cleaning. The specified lamp life is 5,000 hours.

Available models:

MS-70 MX-50 MF-50 ML-50
Measurement method 400W straight halogen lamp heating system with SRA filter and SHS weighing technology
Max sample weight capacity 71g 51g
Weight readability 0.0001g 0.001g 0.002g 0.005g
Moisture content readability 0.001%/0.01%/0.1% 0.01%/0.1% 0.05%/0.1%/1% 0.1%/1%
Heating technology Halogen lamp (Straight type, 400 Watt max, 5000 hours)
Drying temperature (1°C increment) 30-200°C 50-200°C
Memory of measurement programs  20 sets 10 sets 5 sets
Measurement programs Standard mode/Automatic mode/Quick mode/Timer mode/Manual mode
Measurement mode Moisture content(Wet or Dry base) /Dry content/Ratio/Weight
Heating mode Standard/Quick/Step/Ramp Standard/Quick
Display type Large VFD
Standard interface RS-232C
Data memory capacity 100 data 50 data 30 data
Operating temperature 5-40ºC (41-104ºF) less than 85%RH
GLP/GMP/ISO compliant output Available
Self check function Standard
Standard communication software WinCT-Moisture WinCT /
Sample pan size Ø85mm
Power AC 100V to 120V (3A) or AC 200V to 240V (1.5A), 50/60 Hz, Approx. 400W
External dimensions / Net weight 215(W) × 320(D) × 173(H) mm / Approx. 6kg

Brochures

Download your brochure here!

Brochure Moisture analyzers 
A moisture analyzer is a laboratory instrument that determines moisture content by measuring weight loss during heating. It combines high-precision weighing technology with a heating system to calculate moisture content quickly and accurately through the loss-on-drying method.

The loss-on-drying method measures moisture content by weighing a sample before and after heating. The reduction in weight is attributed to evaporated moisture, allowing the analyzer to calculate the sample’s moisture percentage.

A halogen moisture analyzer uses a halogen heating lamp to rapidly heat a sample while a precision balance continuously measures weight loss. The instrument calculates moisture content in real time as moisture evaporates from the sample.

The Super Hybrid Sensor (SHS) is a precision weighing technology that enables highly accurate mass measurements. It allows reliable moisture determination even when working with small sample quantities.

A Secondary Radiation Assist (SRA) filter works together with the halogen lamp to improve heat distribution across the sample. This helps achieve more uniform drying and can reduce overall measurement time.

Related instruments

Explore similar solutions and complementary products.

Semi-micro Balances
Borealis BA Series
Premium micro & semi-micro balances providing ultra-high precision weighing
5-inch color touchscreen
Detachable breeze break unit
External ionizer
Analytical balances
BH-T Series
Premium semi-micro & analytical balances for advanced weighing tasks
Impact shock detection (ISD)
5-inch color touchscreen
External ionizer (static eliminator)
Compact precision balances
Fortis FZ(-WP)/FX(-WP) Series
Compact precision balances
Compact Super Hybrid Sensor (C-SHS)
Dust & waterproof
Compact and portable design