Request a quote
At LabSPX, we are committed to bringing innovative and efficient solutions to laboratories. Our Smart Lab Solutions are designed to streamline processes, enhance accuracy, and boost productivity.
| Specification | More info |
|---|---|
| -50 °C | Light sample loads | For aqueous samples |
| -84 °C | Light to moderate sample loads | For low eutectic point samples containing water or acetonitrile |
| -105 °C | Moderate sample loads | For low eutectic point samples containing water, acetonitrile, dilute methanol or ethanol |
FreeZone benchtop freeze dryers are designed for lyophilizing light sample loads. Their compact benchtop design makes them suitable for laboratories with limited floor space.
Depending on the model, the upright stainless steel collector coil can hold 2.5, 4, or 8 liters of ice before defrosting.
Three collector temperature configurations are available:
−50 °C for aqueous samples
−84 °C for a wide range of laboratory solvents
−105 °C for dilute ethanol and methanol mixtures
FreeZone benchtop freeze dryers operate with Lyo-Works™ OS, displayed on a 5-inch full-color capacitive touchscreen.
The system provides a real-time display of:
Collector temperature
Vacuum level
Optional End-Zone™ end point detection system
The interface allows users to manage:
Start-up mode for collector cool-down and vacuum pull-down (automatic or manual)
Operating mode (standby or run)
Vacuum set points
Alerts and diagnostic tests
Defrost control
Optional drying accessory parameters
Compact benchtop footprint suitable for countertops or laboratory carts
Brushed stainless steel and glacier white powder-coated steel exterior with blue accents
Upright stainless steel collector chamber that simplifies defrosting
Acrylic collector lid (¾" thick) with neoprene gasket and 3-inch diameter port for drying accessories
Real-time monitoring through the touchscreen interface
Data logging and export capability
Programmable alerts
Security lock-out for system settings
Maintenance monitoring alerts
Hot gas defrost with automatic shut-off
Moisture detection system to protect the vacuum pump
Several integrated components support reliable vacuum control and freeze-drying performance:
Vacuum control valve maintains the set vacuum level
Vacuum break valve bleeds air into the system when the freeze dryer or vacuum pump is shut off, preventing oil backstreaming
Moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line or collector chamber area
If a power outage occurs:
For interruptions of less than approximately 5 minutes, the system restarts automatically and refrigeration and vacuum operation resume once power returns
For outages longer than approximately 5 minutes, the freeze dryer will not automatically restart if the collector warms above safe limits
| Collector capacity | Water removed in 24h | Refrigeration temperature |
| 2.5L | 2L | -50 °C |
| 2.5L | 2L | -50 °C |
| 2.5L | 2.2L | -84 °C |
| 2.5L | 2.2L | -84 °C |
| 4.5L | 2L | -50 °C |
| 4.5L | 2L | -50 °C |
| 4.5L | 4L | -84 °C |
| 4.5L | 4L | -84 °C |
| 4.5L | 2.5L | -105 °C |
| 4.5L | 2.5L | -105 °C |
| 8L | 4L | -50 °C |
| 8L | 4L | -50 °C |
Explore similar solutions and complementary products.