Dust and waterproof precision balances
The FXi-WP Series are
dust and waterproof precision balances. These balances are designed to perform reliably in environments where moisture or dust would typically hinder a standard precision balance. They are fully resistant to both wet and dry product spillages and built ruggedly to handle tough conditions. These high-quality balances are versatile enough to be used virtually anywhere.
Schokdemperfunctie
The internal shock absorber protects the C-SHS from damage caused by both vertical and transverse overloading.
Multiple weighing units
You can choose from standard or programmable weighing units, including: g, pcs, %, oz, lb, lb oz, ozt, ct, mom, dwt, GN, tl, tol, mes, and MLT.
Statistical calculation function
The balance can display and/or output statistical calculation data, including: No. (number of data), SUM (total), MAX (maximum), MIN (minimum), R (range: maximum – minimum), AVE (average), SD (standard deviation), and CV (coefficient of variation).
Built-in rechargeable battery
An optional Ni-MH rechargeable battery pack allows the balance to operate without AC power, making it ideal for mobile applications. A full charge takes 10 hours and provides up to 8 hours of operation.
Kenmerken:
- IP65 standard waterproof protection
- Fast stabilization speed within1 second
- GLP, GMP, GCP, ISO compliant
- Digital calibration function
- Comparator function
- Buzzer function
- Counting function with ACAI (automatic counting accuracy improvement)
- Percent mode function
- Auto power ON & OFF functions
- Built-in rechargeable battery
- Adjustable foot
Beschikbare modellen:
|
FX-120iWP |
FX-200iWP |
FX-300iWP |
FX-1200iWP |
FX-2000iWP |
FX-3000iWP |
| Weighing capacity |
122g |
220g |
320g |
1220g |
2200g |
3200g |
| Minimum weighing value |
0.001g |
0.01g |
| Repeatability (Standard deviation) |
0.001g |
0.01g |
| Linearity |
±0.002g |
±0.02g |
| Stabilization time (typically set at FAST) |
Approx. 1 second |
| Sensitivity drift (10°C to 30°C) |
±2ppm / °C |
| Operating temperature |
5°C to 40°C (41°F to 104°F), 85%RH or less (no condensation) |
| Display type |
Vacuum Fluorescent Display (VFD) |
| Display refresh rate |
5 times /second, 10 times /second or 20 times /second |
| Standard interface |
RS-232C Interface |
| Weighing pan (diameter) |
130mm |
150mm |
| Interne kalibratie |
Air-pump Controlled Internal Calibration (FZ-iWP models only) |
| AC adaptor |
Confirm that the adaptor type is correct for the local voltage and power receptacle |
| Power consumption |
Approx. 11VA (supplied to the AC adaptor) |
| External dimensions |
193 (W) X 262.5 (D) X 85.5 (H) mm |
| Net weight |
FZ-iWP Approx. 3.2kg / FX-iWP Approx. 2.7kg |
